Applying Vinyl Decals
For best results, apply decals in dry environment with temperatures at least 50 degrees Fierenheight.
Step 1: Clean the area thoroughly with rubbing alcohol or soap and water. DO NOT use glass cleaner or similar products because it will leave a residue behind that will prevent the vinyl from adhearing well.
Step 2: Prepare the Vinyl for application by firmly rubbing a squeegee or credit card across the transfer tape. This removes any air bubbles that may have formed and makes the sticker cling to the transfer tape.
Step 3: Peel the white paper backing off the tape and the vinyl. If the vinyl clings to the backing, slowly replace the paper backing and repeat step 2.
Step 4: Slowly lower the vinyl onto the surface and rub it in place firmly with a squeegee or credit card. For best results wait 24 hours before moving to the next step.
Step 5: Slowly peel the transfer tape off at an angle. Be careful not to pull the vinyl off the surface. If vinyl pulls away from the surface repeat step 4.